1970's Sindy maypole shop display stand.
Copy and print the pictures below full size by clicking the image
and copying the large image.
They are all designed to fit on an A4 piece of paper or card.
300dpi
Follow the instruction above each piece before moving onto step two.
You will need: Uhu glue
A pencil
A cereal packet or large thick piece of card (at least 29cm square)
Scissors
A large cardboard box
Colour printer
Card or paper
A cocktail stick, lolly stick or wooden bbq skewer (cut off the sharp end)
6 x 30cm lengths of ribbon (Any colour but the original is
Dark pink, white, yellow, blue, red and green)
Lots of lovely dolls to display
1.
Name cards
Print on paper and glue to card or print on card
Cut along all dotted lines.
Score along the solid lines and fold.
2.
Flag
Print on paper.
Cut out.
Fold in half around the cocktail stick and glue together.
3.
Base edges.
Print on paper or card.
Cut out and along the straight white lines.
4.
Top small cone.
Print on paper and glue to card
or print on card.
Fold into a cone, glue the flap and secure until the glue has dried.
Cut a small circle of card about 3cm across and make a hole
in the middle. Glue around the edge and glue it up inside the cone.
5.
Base circle 1st half
Print on paper
6.
Base circle 2nd half
Print on paper
7.
Pole piece Top
Print on card or
on paper and glue to card
8.
Pole piece Bottom
Print on card or
on paper and glue to card
9.
Charm bracelet card stand
Print on paper and glue to card
or print on card.
Cut along dotted lines and score along the solid line.
10.
Charm bracelet card
Print on paper and glue to card
or print on card
Cut it out and cut out the two small slots in the top for your
Sindy charm bracelet.
Glue the thin fold of the stand above to the back of this card
